PRODUCTS
Tube Ice Machine
A tube ice generator is an ice generator in which the water is frozen in tubes that are extended vertically within a surrounding casing—the freezing chamber. At the bottom of the freezing chamber there is a distributor plate having apertures surrounding the tubes and attached to the separate chamber into which a warm gas is passed to heat the tubes and cause the ice rods to slide down
Tube ice can be used in cooling processes, such as temperature controlling, fresh fish
freezing, and beverage bottle freezing. It can be consumed alone or with food or beverages.
Tube ice machine capacity is available at 1 ton, 2 tons, 5 tons, 10 tons, 20 tons, 30 tons, 50 tons, 60 tons, 80 tons, 90 tons and 100 tons and as always, we can try customizing your machine that will fit your business needs.
We can use Bitzer, Mycom or Grasso compressor depending on the capacity you choose.
Flake Ice Machine
Flake ice is made of the mixture of brine and water (max 500 g [18 oz] salt per ton of water), in some cases can be directly made from brine water. Thickness between 1 and 15 mm (1⁄16 and 9⁄16 in), irregular shape with diameters from 12 to 45 mm (1⁄2 to 1 3⁄4 in).
The evaporator of the flake ice machine is a vertically placed drum-shape stainless steel container, equipped with the rotating blade which spins and scratches the ice off the inner wall of the drum. When operating, the principal shaft and blade spins anti-clockwise pushed by the reducer. Water is sprayed down from the sprinkler; ice is formed from the water brine on the inner wall. The water tray at the bottom catches the cold water while deflecting Ice and re-circulates it back into the sump. The sump will typically use a float valve to fill as needed during production. Flake machines tend to form an ice ring inside the bottom of the drum. Electric heaters are in wells at the very bottom to prevent this accumulation of ice where the crusher does not reach. Some machines use scrapers to assist this. This system utilizes a low temperature condensing unit; like all ice machines.
Ice Block Machine
Block ice has a large dimension but has small contact area, so it does not melt easily. It is usually cut into different pieces for different uses in ice sculpture, sea shipping and fish vessels. The small pieces of block ice can be also be used for various purposes. There will be a little loss because the ice will thaw partly when crushed
Cold Room Storage
Rigid polyurethane foam is the internationally recognized best construction materials. Polyurethane panel has low thermal conductivity, good load resistant performance and high bending strength. It is non-absorbent, anti-rot, no moth eaten, and rat bitten, good fire resistance, and large scope of heat-resistant. The metal plate has been placed on the special-design mold.
With the aid of spraying device , polyurethane foaming agent is sprayed on the metal plate and use computer to control automatically to make the foaming agent be formed between metal plate ,so that complete color steel sandwich PU panel with three layer in one time.(metal plate material can be selected according to customer requirement, such as stainless, embossed aluminum etc.